home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Libris Britannia 4
/
science library(b).zip
/
science library(b)
/
COMMUNIC
/
BULLETIN
/
1806B.ZIP
/
WILD-TD.LZH
/
BULLET1.BBS
< prev
next >
Wrap
File List
|
1991-03-01
|
1KB
|
21 lines
COLOR MENU SETUP! In order to select and receive Color Menus, you need
to have your system set up properly beforehand. YOU DO NOT NEED A
COLOR/GRAPHICS CARD TO SELECT COLOR MENUS! However, you MUST have
created a text file in your boot directory on your boot disk called
CONFIG.SYS. This file MUST contain the line:
DEVICE=ANSI.SYS
It may also have other commands as you require. You can create this
text file using any word processor that is capable of creating standard
ASCII text (PC-Write, Edlin, Wordstar in Non-document mode, etc.) In
addition, the file ANSI.SYS (it came on your DOS disk) must be on the
boot disk. From there it is a simple matter of selecting Color Menus by
pressing [Y]our Settings at the Main Menu and checking to see if they
work. If you see a lot of little arrows, brackets and numbers then
something is wrong. If you are using QMODEM you must also toggle
Graphics ON with ALT G. Qmodem allows you to change the default of the
graphics toggle in the install program.